Documentation

bigiq_regkey_license_assignment - Manage regkey license assignment on BIG-IPs from a BIG-IQ.

New in version 2.6.

Synopsis

  • Manages the assignment of regkey licenses on a BIG-IQ. Assignment means that the license is assigned to a BIG-IP, or, it needs to be assigned to a BIG-IP. Additionally, this module supported revoking the assignments from BIG-IP devices.

Requirements

The below requirements are needed on the host that executes this module.

  • f5-sdk >= 3.0.9

Parameters

Parameter Choices/Defaults Comments
device
When managed is no, specifies the address, or hostname, where the BIG-IQ can reach the remote device to register.
When managed is yes, specifies the managed device, or device UUID, that you want to register.
If managed is yes, it is very important that you do not have more than one device with the same name. BIG-IQ internally recognizes devices by their ID, and therefore, this module's cannot guarantee that the correct device will be registered. The device returned is the device that will be used.
device_password
The password of the device_username.
When managed is no, this parameter is required.
device_port Default:
443
Specifies the port of the remote device to connect to.
If this parameter is not specified, the default of 443 will be used.
device_username
The username used to connect to the remote device.
This username should be one that has sufficient privileges on the remote device to do licensing. Usually this is the Administrator role.
When managed is no, this parameter is required.
key
required
The registration key that you want to assign from the pool.
managed
bool
    Choices:
  • no
  • yes
Whether the specified device is a managed or un-managed device.
When state is present, this parameter is required.
password
required
The password for the user account used to connect to the BIG-IP. You can omit this option if the environment variable F5_PASSWORD is set.

aliases: pass, pwd
pool
required
The registration key pool to use.
provider
(added in 2.5)
A dict object containing connection details.
ssh_keyfile
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
timeout Default:
10
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
server
required
The BIG-IP host. You can omit this option if the environment variable F5_SERVER is set.
user
required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You can omit this option if the environment variable F5_USER is set.
server_port Default:
443
The BIG-IP server port. You can omit this option if the environment variable F5_SERVER_PORT is set.
password
required
The password for the user account used to connect to the BIG-IP. You can omit this option if the environment variable F5_PASSWORD is set.

aliases: pass, pwd
validate_certs
bool
    Choices:
  • no
  • yes ←
If no, SSL certificates will not be validated. Use this only on personally controlled sites using self-signed certificates. You can omit this option if the environment variable F5_VALIDATE_CERTS is set.
transport
required
    Choices:
  • rest
  • cli ←
Configures the transport connection to use when connecting to the remote device.
server
required
The BIG-IP host. You can omit this option if the environment variable F5_SERVER is set.
server_port
(added in 2.2)
Default:
443
The BIG-IP server port. You can omit this option if the environment variable F5_SERVER_PORT is set.
state
    Choices:
  • present ←
  • absent
When present, ensures that the device is assigned the specified license.
When absent, ensures the license is revokes from the remote device and freed on the BIG-IQ.
user
required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You can omit this option if the environment variable F5_USER is set.
validate_certs
bool

(added in 2.0)
    Choices:
  • no
  • yes ←
If no, SSL certificates will not be validated. Use this only on personally controlled sites using self-signed certificates. You can omit this option if the environment variable F5_VALIDATE_CERTS is set.

Notes

Note

Examples

- name: Register an unmanaged device
  bigiq_regkey_license_assignment:
    pool: my-regkey-pool
    key: XXXX-XXXX-XXXX-XXXX-XXXX
    device: 1.1.1.1
    managed: no
    device_username: admin
    device_password: secret
    password: secret
    server: lb.mydomain.com
    state: present
    user: admin
  delegate_to: localhost

- name: Register an managed device, by name
  bigiq_regkey_license_assignment:
    pool: my-regkey-pool
    key: XXXX-XXXX-XXXX-XXXX-XXXX
    device: bigi1.foo.com
    managed: yes
    password: secret
    server: lb.mydomain.com
    state: present
    user: admin
  delegate_to: localhost

- name: Register an managed device, by UUID
  bigiq_regkey_license_assignment:
    pool: my-regkey-pool
    key: XXXX-XXXX-XXXX-XXXX-XXXX
    device: 7141a063-7cf8-423f-9829-9d40599fa3e0
    managed: yes
    password: secret
    server: lb.mydomain.com
    state: present
    user: admin
  delegate_to: localhost

Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Author

  • Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation you can edit this document to improve it.