Skip Headers
Oracle® Database Gateway for APPC Installation and Configuration Guide
11g Release 2 (11.2) for Microsoft Windows

Part Number E12079-02
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Contact Us

Go to previous page
Previous
Go to next page
Next
PDF · Mobi · ePub

11 Migration from Existing Gateways

Migrating to new instances of the Oracle Database Gateway for APPC from an existing installation is straightforward, provided you follow some guidelines. This chapter provides information to make these new installations as easy as possible. It also provides the parameters you will need if you are using the TCP/IP for IMS Connect communication protocol on your gateway.

This chapter provides information that is specific to this release of the Oracle Database Gateway for APPC for Microsoft Windows. It contains the following sections:

11.1 Migrating an Existing Gateway Instance to New Release Using SNA Protocol

Follow these steps to migrate an existing gateway to Release 11.2 of the gateway using the SNA communication protocol.

Note that if you are using the gateway's TCP/IP support for IMS Connect, you will not be migrating an existing release to the current release of the gateway. However, you will need to place valid Heterogeneous Services parameters into your initsid.ora file. Proceed to "Parameter Changes: Version 4 to Release 11.2 of the Gateway".

11.1.1 Step 1: Install the New Release

Install the new release of the gateway in a separate directory as outlined in Chapter 4, "Installing the Gateway".

Caution:

Do not install the gateway over an existing gateway installation. Doing so will corrupt the existing installation.

11.1.2 Step 2: Transfer initsid.ora Gateway Initialization File Parameters

Copy the initsid.ora file from the old gateway instance to the new instance.

Note that if you are migrating from Release 9.0.1 or earlier of the gateway, then PGA_TRACE is not supported, you will need to modify the parameter to TRACE_LEVEL, instead.

Note:

If you are using TRACE_LEVEL, then you must set the path for the LOG_DESTINATION parameter.

11.1.3 Backout Considerations When Migrating to New Releases

Oracle recommends that you keep the old gateway Oracle home directory and instance configurations intact and operational when you are installing a new release of the gateway and upgrading existing instances, in case there are problems with the upgrade. This will help ensure minimal downtime between changes to different gateway instances.

11.1.4 Oracle Net Considerations

The Oracle Database Gateway for APPC uses the Heterogeneous Services (HS) facilities of Oracle and Oracle Net. If you are upgrading from a version 4 gateway, then you need to slightly modify the gateway service name entries in the tnsnames.ora file. Add an (HS=) clause to communicate to Oracle Net that the gateway uses HS facilities. For more information, refer to "Configuring the Oracle Network for the Gateway".

11.1.5 Parameter Changes: Version 4 to Release 11.2 of the Gateway

This release of the Oracle Database Gateway for APPC introduces new and changed initialization parameters if you are migrating from version 4 gateway to release 11.2 of the gateway.

Note:

This section does not apply to you if you are migrating to release 11.2 from version 8 of the Oracle Database Gateway for APPC.

If you are using the gateway's TCP/IP support for IMS Connect, then you will not be migrating from version 4 to the current release of the gateway. However, you will need to place valid Heterogeneous Services parameters into your initsid.ora file.

This chapter contains references to the particular HS parameters you need to run the gateway.

Note:

Refer to the Oracle Database Heterogeneous Connectivity User's Guide for a complete list and descriptions of all HS parameters used in Oracle products.

New Gateway Initialization Parameters

The following parameters are in the gateway initialization file (initsid.ora):

  • FDS_CLASS

  • FDS_INSTANCE

  • HS_FDS_FETCH_ROWS

  • LOG_DESTINATION

  • TRACE_LEVEL

  • PGA_TCP_DB (TCP/IP only)

  • PGA_TCP_USER (TCP/IP only)

  • PGA_TCP_PASS (TCP/IP only)

    Note:

    The HS_ parameters are specific to Oracle Heterogeneous Services. For details on HS parameters, refer to the Oracle Database Administrator's Guide.

Renamed Gateway Initialization File Parameters

Following is a list of the gateway initialization file (initsid.ora) parameters that have been renamed in this release of the gateway, the parameters' former names are shown in parentheses.

  • HS_COMMIT_STRENGTH_POINT (COMMIT_STRENGTH_POINT)

  • HS_DB_DOMAIN ( DB_DOMAIN)

  • HS_DB_INTERNAL_NAME (DB_INTERNAL_NAME)

  • HS_DB_NAME (DB_NAME)

  • HS_DESCRIBE_CACHE_HWM (DESCRIBE_CACHE_HWM)

  • HS_LANGUAGE (LANGUAGE)

  • HS_NLS_DATE_FORMAT (NLS_DATE_FORMAT)

  • HS_NLS_DATE_LANGUAGE (NLS_DATE_LANGUAGE)

  • HS_OPEN_CURSORS (OPEN_CURSORS)

  • HS_ROWID_CACHE_SIZE (ROWID_CACHE_SIZE)

Obsolete Parameters

The following parameters are now obsolete. Please remove them from your configuration files:

  • MODE

  • SERVER_PATH

  • ERROR_LOGGING

  • ERROR_REPORTING

  • ERRORTAG

  • GATEWAY_SID

  • GROUP_BY_OFF

  • GTWDEBUG

  • INCREMENT_CURSORS

  • INIT_CURSORS

  • LIST

  • MAX_LOG_SIZE

  • OPTIMIZE_FILE_OPEN

  • ORDER_BY_OFF

  • RESOLVE_BINDS

  • RETRY

  • SET

  • SNMP_SUPPORT

  • SQL_TRACE

  • TRIM_CURSORS

  • D_OPEN_CURSORS

  • D_INIT_CURSORS

  • D_INCREMENT_CURSORS

  • D_TRIM_CURSORS

  • PGA_TRACE

11.1.6 Parameter Changes: Version 8 or Earlier to Gateway Release 11.2

The following startup shell script parameter must be added to initsid.ora if you are migrating from version 4 or version 8 gateway to the current release of the Oracle Database Gateway for APPC:

  • FDS_CLASS_VERSION

11.1.7 Migrating from Gateway Release 9.0.1 or 9.2.0 to Gateway Release 11.2

No new parameters were added between release 9.0.1 and this release of the gateway.

11.2 Migrating from an Existing Gateway Using SNA to TCP/IP

The following sections are for users who have an existing release of the gateway using the SNA protocol but who wish to switch to using TCP/IP support for IMS Connect.

The TCP/IP support for IMS Connect feature in this release of the gateway allows you to continue to use existing TIPs.

11.2.1 To Use Existing TIPs with Existing Side Profile Definitions

Follow these instructions:

  1. Make sure you have used the pg4tcpmap tool to insert valid parameter values into the PGA_TCP_IMSC table.

    Refer to Chapter 9, "Gateway Configuration Using TCP/IP Communication Protocol" for instructions on loading the PGA_TCP_IMSC table.

  2. Make sure that the LANGUAGE parameter in your TIPs is set to american_america_us7ascii.

  3. Use PGAU to regenerate the IMS TIPs.

  4. Add the following new TCP/IP parameters to the initsid.ora file:

    • PGA_TCP_DB

    • PGA_TCP_USER

    • PGA_TCP_PASS

    You will find descriptions and information about adding these parameters in Section 11.1.5, "Parameter Changes: Version 4 to Release 11.2 of the Gateway". You will also find descriptions of the parameters in Appendix B, "Gateway Initialization Parameters for TCP/IP Communication Protocol".

    Note:

    If your TIPs from a previous version of the gateway were already defined using a side profile name and the NLS_LANGUAGE parameter has been set to a value of american_america_us7ascii, then you will not need to recompile these TIPs. You will still need to map your parameter values using the pg4tcpmap tool.

    Note:

    TIPS must be recompiled when changing the communication protocol from SNA to TCP/IP.

    If you have existing TIPs that were generated previously on a gateway using the SNA protocol and you want to use the new TCP/IP feature, then the TIPs will have to be regenerated by PGAU with mandatory NLS_LANGUAGE and Side Profile Settings. Specify the suitable ASCII character set in the DEFINE TRANSACTION command.

    This is due to the fact that the gateway assumes that the suitable user exit in IMS Connect is being used, which would translate between the suitable ASCII and EBCDIC character sets.